Product PDF: Toughened Glass Insulator
The electrical behavior in overhead lines operation depends primarily on the external insulation.
An insulator should have enough electro-mechanical strength to support not only the conductor weight, but also the stresses by wind, lighting and flashover under any humidity condition.
The glass insulators for overhead lines are manufactured ... Toughened Glass Insulator
Product PDF: Toughened Glass Insulator
The electrical behavior in overhead lines operation depends primarily on the external insulation.
An insulator should have enough electro-mechanical strength to support not only the conductor weight, but also the stresses by wind, lighting and flashover under any humidity condition.
The glass insulators for overhead lines are manufactured ... Disconnect Switch
Product PDF: Disconnect Switch
For manual switching of overhead lines on electrical distrubution systems up to 38 KV.
Its design allows for application as a distribution switch or a substation switch.
Rated for 6330 or 1,250 amps continuous, 25,000 and 38,100 momentary amps sym 3 seconds short-time withstand current.
They are according to CFE-V4200-25/97 ... Dead End Insulator
Product PDF: Dead End Insulator
Dead-end insulators for overhead lines.
Leakage current surge suppression due to high level of hydrophobicity of silicone rubber.
Aging evaluation at 5000 h in salt fog
Better performance in polluted areas
Light weight for handling and installation
The core rod of insulator is made of a fiberglass that has excellent electrical ... Cutout Fuse
Product PDF: Cutout Fuse
The cutout fuse is used in distribution from 15 KV to 27 KV, with nominal current of 100 amps and interruption currents from 8, 10 and 12 KA asymmetrics, to protect transformers, capcior banks and distribution lines against overloads and short-circuit currents.
The cutout fuse was developed to ... XHHW-2
Categories: Commercial, Featured, Products, Utility
Product PDF: XHHW-2
Applications
Type XHHW-2 conductors are primarily used in conduit or other recognized raceways for services, feeders, and branch circuit wiring, as specified in the National Electrical Code®. Type XHHW-2 conductors may be used in wet or dry locations at temperatures not to exceed 90°C. Voltage rating for XHHW-2 ... Bare Copper
Categories: Commercial, Products, Utility
Bare Copper Conductor.
Solid and Stranded
Product PDF: Bare Copper
Applications
Solid and stranded (classes AA and A) bare copper are suitable for overhead transmission and distribution applications. Stranded conductor of greater flexibility (classes B and C) are suitable for uninsulated hook up, jumpers, and grounds in electrical construction.
Specifications
Bare copper wire and cable meets ... 
